Sony PCG-GRZ530 - Manual (Page 50)

VAIO® Computer Quick Start
50
Troubleshooting Your Computer
Why doesn’t my computer start?
❑ Make sure the computer is securely plugged into a power source and is
turned on. Make sure the power indicator shows the power is on. See
“Connecting a Power Source” for more information.
❑ Make sure the battery is inserted properly and is charged.
❑ If the computer is connected to a docking station with a floppy disk drive or
to an external floppy disk drive, make sure the floppy disk drive is empty.
❑ If the computer is plugged into a power strip or Uninterruptible Power
Supply (UPS), make sure the power strip or UPS is turned on and working.
❑ If you are using an external display, make sure it is plugged into a power
source and turned on. Make sure the brightness and contrast controls are
adjusted correctly. See the manual that came with your display for details.
❑ Remove the battery from the computer, unplug the power cord, and plug it in
again. Turn on the power.
❑ If the computer does not turn on, remove the AC adapter and battery. Wait
one minute, and then reattach them before pressing the power button.
❑ Condensation may cause the computer to malfunction. If this occurs, do not
use the computer for at least one hour.
❑ Unplug the power cord, press the reset button by using a thin, straight object
(such as a paper clip), remove the battery if one is installed, plug the power
cord in again, and turn on the computer. To find your computer’s reset
button, see “Locating Controls and Ports” in the “Setting Up” chapter of
your supplied VAIO® Quick Start.
Why does a BIOS error appear when my computer starts?
If the message “Press <F1> to resume, <F2> to setup” appears at the bottom of
the screen, follow these steps:
1 Press F2. The BIOS Setup menu appears.
2 Set the date (month/day/year). Press Enter.
3 Press the Down Arrow key to select System Time, and then set the time
(hour: minute: second). Press Enter.