Sony MDR-AS700BT - Manual (Page 95)

7. Use the first smartphone to establish a BLUETOOTH connection again.
Both smartphones are connected with the headset with only one function
enabled.
To call during playback
Make a phone call using the smartphone designated for making a phone call.
If no dial tone is heard via the headset, switch the call device to the headset
using your smartphone or mobile phone. With an HFP connection, you can do
this by pressing the POWER button on the headset for about 2 seconds.
To receive a call
When an incoming call arrives, the music playback pauses, and a ring tone is
heard via the headset.
Press the POWER button on the headset and talk using the microphone.
To end a call, press the POWER button on the headset to switch back to
music playback.
Note
When no ring tone is heard even if an incoming call arrives, stop music
playback. When ringing, press the POWER button and talk.
To disconnect the call
Press the
POWER button on the headset to switch back to music playback.
Related topic
Pairing and connecting with an Android smartphone
Pairing and connecting with an iPhone
Connecting with a smartphone by one-touch functions
Connecting the headset with an Android smartphone and an iPhone
Copyright 2013 Sony Corporation
95