Sony TMR-BT8IP - Manual (Page 16)

TMR-BT8iP [US,FR,ES] 3-279-360-32(1)
16 US
Controlling by the Remote
When connecting (Bluetooth connecting) to devices that
support AVRCP (Audio/Video Remote Control Profile)
You can control the iPod using the control button of the Bluetooth receiving device.
For details, see the operating instructions supplied with the Bluetooth devices.
Before starting remote control operation, check that step 1 and 2 of
“Bluetooth Connecting / Playing back” are completed (page 1).
Remote control for the iPod by the Bluetooth receiving device.
Remote control
(play, pause, etc.)
Headset with AVRCP
Notes
 Even if you control the volume on the iPod, the volume of the Bluetooth
receiving device, such as a headset, does not change.
 When operating the iPod by remote control, do not cover this unit with hands.
 You may need to press the play/pause button twice depending on the Bluetooth
receiving device.
 You may need to press the play/pause button of the Bluetooth receiving device
twice when you operate the button on the iPod.
 Operation of the iPod with this unit by the Bluetooth receiving device will vary
depending on the Bluetooth receiving device’s specification.
 When the iPod is playing a video or photo, remote control operation may
become unstable.
 Tip
When you press the pause button on the Bluetooth receiving device, the iPod goes
to pause mode for 10 minutes and the iPod backlight is turns on and off at interval.
Do not cover this
unit with hands.