Sony HT-SS370HP - Manual (Page 50)

50 US
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission.
To set the ID of the S-AIR main
unit
1
Press AMP MENU.
“LEVEL” appears on the display.
2
Press V/v repeatedly until
“S-AIR SET” appears, then
press
or b.
3
Press V/v repeatedly until
“S-AIR ID” appears, then press
or b.
4
Press V/v repeatedly to select
the desired ID (A, B or C) then
press .
5
Set the S-AIR sub unit to the
same ID.
Sound transmission is established as
follows:
6
Press AMP MENU.
The AMP menu turns off.
To set the ID of the S-AIR sub
unit
Be sure to match the ID on S-AIR sub unit you
want to the S-AIR main unit.
For details on setting the ID of the S-AIR sub
unit, refer to the operating instructions
supplied with the S-AIR sub unit.
To use multiple S-AIR main
units
You can use multiple S-AIR products by
setting a different ID for each unit.
Sound transmission is established as follows:
Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
O
MENU
AMP
MENU
,
V/v/B/b
ID A ID A
ID A
MASTER VOLUME
ACTIVE STANDBY POWER/
S-AIR main unit (this receiver)
S-AIR sub unit S-AIR sub unit
ID A ID A ID B
ID A ID B MASTER VOLUME
ACTIVE STANDBY POWER/
S-AIR main unit
(this receiver) Other S-AIR
main unit
S-AIR
sub unit S-AIR
sub unit S-AIR sub unit