Sony NWZ-A726PNK - Manual (Page 105)

NWZ-A726 / A 728 / A729.GB.3-299-381-11(1)
Troubleshooting 10 10
Symptom Cause/Remedy
The player does not work.  The remaining battery power is insufficient.
 Charge the battery by connecting the player to a
running computer ( page 21).
 If you charge the battery and nothing changes,
press the RESET button to reset the player (
page 101).
Transferred data cannot
be found.
 Th e built-in flash memory of the player was
formatted using Windows Explorer.
 Format the built-in flash memory on the player
( page 92).
 The supplied USB cable was disconnected from the
player while data was being transferred.
 Transfer usable files back to your computer and
format the built-in flash memory on the player
( page 92).
 A fter dragging and dropping in Windows Explorer,
data hierarchy levels do not correspond to the player
( page 24).
 T ransferred files are not in a playable format. For
details, see “Supported file format” of
“Specifications” ( page 126).
 Convert the ATRAC audio data using the
supplied MP3 Conversion Tool.
 Songs or videos may not be played back,
depending on the file format ( page 126).
 Photos may not be displayed, depending on the
file size or the file format ( page 126).
The volume is not loud
enough.
 “AVLS (Volume Limit)” is enabled.
 Disable “AVLS (Volume Limit)” ( page 81).
There is no sound from
the right channel of the
headphones.
Or the right channel
sound is heard from both
sides of the headphones.
 Th e headphone jack is not fully inserted.
 If the headphones are not connected correctly,
sound will not be output properly. Insert the
connecting pin of the headphones into the jack
until it clicks ( page 10).
Playback has stopped
suddenly.
 Th e remaining battery power is insufficient.
 Charge the battery by connecting the player to a
running computer ( page 21).
 The songs or video files that cannot be played are
played.
 Play back the other song or video files.
Continued 
Operation
(continued) Table of Cont
ents
Men
u
Inde
x