Getting started, Charging the battery pack – Sony DSC-P7 User Manual

Page 10

Advertising
background image

10

filename[C:\My Documents\_upload job\3075896111\3075896111DSCP7UC\02GB-DSCP7UC\04BAS.FM]

masterpage:Left

model name1[DSC-P7/P9]

[3-075-896-11(1)]

Charging the battery pack

,

Open the battery/“Memory
Stick” cover.

Slide the cover in the direction of the arrow.

• When charging the battery pack, make

sure the camera is not turned on
(page 15)
.

•

The camera operates only with the
“InfoLITHIUM” battery NP-FC10 battery pack
(C type) (supplied). You cannot use any other
battery pack (page 96).

,

Insert the battery pack, and
close the cover.

Insert the battery pack with the v mark
facing toward the battery compartment as
illustrated above. Make sure the battery
pack is properly inserted, then close the
cover.

•

While pushing the battery eject lever down
using the front edge of the battery pack, you
can easily insert the battery pack.

,

Open the jack cover, and
connect the AC-LS1A AC
power adaptor (supplied) to the
DC IN jack of the camera.

Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v mark facing up.

•

Do not short the DC plug on the AC power
adaptor with a piece of metal. This may cause a
malfunction.

•

Clean the DC plug of the AC power adaptor
with a dry cotton bud. Do not use the dirty plug.
Use of the dirty plug may not properly charge
the battery pack.

1

OPEN

2

Battery eject lever

3

Jack cover

AC power adaptor

DC plug

Getting started

01cov.book Page 10 Thursday, May 23, 2002 3:57 PM

Advertising