Sony DSC-S500 - Manual (Page 20)

20
Printing images
Printing images using a PictBridge compliant printer
Even if you do not have a computer, you can print images shot using your camera by
connecting the camera directly to a PictBridge compliant printer.
• “PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging Products Association)
Notes:
• You cannot print movies.
• If the
indicator flashes on the screen of the camera for about five seconds (error notification), check
the connected printer.
• For further details on how to use PictBridge print and how to print images copied onto a computer, refer to
“Cyber-shot Handbook”.
Prepare the camera to connect it to the printer via a USB connection.
• It is recommended to use batteries with enough capacity to prevent the power from turning off partway
through printing.
1
Press MENU to display the menu.
2
Press B on the control button to select (Setup).
3
Select (Setup2) with V, then select [USB Connect] with v/V/B.
4
Select [PictBridge] with B/v, then press z.
The USB mode is set.
Stage 1: Preparing the camera
2