Sony DPP-FP97 - Manual (Page 2)

DPP-FP97 Digital Photo Printer GB_U/CED 4-129-105-11(1)
You can process and print selected images from a memory card or internal memory (direct printing).
Calendar printing
 Page 29 in the Operating Instructions
Borders/Borderless print
 Page 41 in the Operating Instructions
Layout print
 Page 33 in the Operating Instructions
Date print
 Page 40 in the Operating Instructions
Adding a frame
 Page 33 in the Operating Instructions
Scrapbook print
 Page 26 in the Operating Instructions
ID Photo print
 Page 34 in the Operating Instructions
Batch printing
Index, DPOF, ALL
 Page 35 in the Operating Instructions
Superimposed printing
 Page 31 in the Operating Instructions Special filter printing
Cross Filter, Painting, Partial Color, Sepia, Monochrome,
Single Color, Fish Eye
 Page 22 in the Operating Instructions
By connecting your printer to a “BRAVIA” Sync-compatible television with an HDMI cable
(sold separately), you can operate your printer from a TV remote control unit. You can print
an image while confirming the printed image on a large TV screen.
 Page 45 in the Operating Instructions
6
Select an image
for printing.
Press / button
repeatedly until the image
that you want to print
appears.
7
Press the PRINT button.
What you can do with the digital photo printer (Refer to the Operating Instructions for the operations below.)
5
Turn on the printer.
An image stored on the memory card is
displayed.
Making a variety of prints
3
Connect to the AC power source.
1
Insert the plug of the AC adaptor into the DC IN 24 V
jack on the back of the printer.
2
Connect one plug of the AC power cord to the connector
of the AC adaptor and the other plug to the wall outlet.
Install the printer in a
location with 10 cm
(13/32 inch) or more
of space at the rear.
To
DC IN 24 V
connector AC adaptor
To the wall
outlet
AC power cord
10 cm
(13/32 inch)
4
Insert a memory card into the slot.
Insert the memory card containing an image for printing into the appropriate slot with its terminal side facing
toward the slot.
“Memory Stick” media
(“Memory Stick Duo” media)
xD-Picture
Card
SD Memory
Card
CompactFlash
Card
“Memory Stick”
media
(“Memory Stick
Duo” media)
xD-Picture Card or
SD Memory Card
CompactFlash Card

Notes
• A memory card has two sides and an insertion direction. Be sure to check the correct insertion direction of the card and
the correct insertion slot width, and then insert the memory card with its label side facing up.
• When carrying your printer, make sure to remove the memory card, AC adaptor, cables or cords, and paper
tray. Otherwise, the printer may be damaged.
The printing process
The printer employs a dye sublimation printing system.
In this printing system, the thermal print head heats up as it passes over the
yellow , magenta , and then cyan layer of the ink ribbon, causing the dyes to
vaporize and permeate the surface of the print paper. Then the final cycle
lays a laminate layer as an overcoating to protect the printed surface:

Notes
• The ink ribbon cannot be reused. You cannot reuse it by rewinding.
• The number on the ink ribbon cartridge is the maximum number of sheets that
can be printed with that cartridge. (e.g.: In case of SVM-F40P, you can print up
to 40 sheets.)
• Print paper emerges from the back and front paper outlets each time a color
is printed. Please wait until printing is completed and the print paper is
automatically ejected onto the paper tray.
Yellow
Magenta
Cyan
Print Paper
Laminate film
The direction the ink film moves
inside the ink ribbon
Printing from a device other than a memory card or internal memory
Printing from a PictBridge or other camera  Page 49
Printing via Bluetooth communication  Page 50
Printing from a PC  Page 52
Printing from a digital photo frame  Page 48
Printing from a variety of devices
Operating your printer from a TV remote control unit
Access indicator