AEG COMPETENCE 3210 BU - Manual (Page 43)

NOTES
43
CHECKING ELECTRICAL CONNECTIONS
·
Confirm the appliance is correctly connected by
switching on and observing the various oven
functions indicators.
·
The electronic timer will flash on and off.
CONNECTING TO A HOB OR COOKER
POINT
·
Either follow in general terms the instructions for
connecting to the terminal block or refer to the
hob suppliers installation instructions.
Feed the cable through the cabinet and arrange
to route the cable away from the appliance.
NOTE: HOUSE CIRCUIT
Earth leakage / continuity tests must be carried out
before the appliance is connected to the mains
supply and re-checked after fitting.
INSTALLATION INSTRUCTIONS