AT&T AT5872 - Manual (Page 3)

1. Plug the power adapter into an electrical
outlet not controlled by a wall switch,
and the connector into the power jack
at bottom of the telephone base.
2. Plug one end of the telephone line
cord into the telephone line jack at the
bottom of the telephone base. Then
plug the other end of the cord into the
modular wall telephone outlet.
Install Telephone Base
STEP 2
Standard electrical
outlet not controlled
by a wall switch
NOTES:
1. Use only the power cord supplied with this product.
2. Be sure to use an electrical outlet not controlled by a wall switch.
Modular telephone
wall jack