Sony KV-BZ21M80 - Manual (Page 6)

6
Sony KV-SW21M80 Group O29 (
GB
, FR, AR)_2-653-742-11 (1)
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to edit
is highlighted: Label, Skip,
(block symbol).
Then press .
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press
.
2) To skip the program number, press V or v to
select “On”. Then press .
You can skip this program number when
using PROG +/–.
3) To block unwanted program number,
press V or v to select . Then press .
e) Repeat step b) to d) if you wish to change other
channels.
Press WEGA GATE to go to the next menu.
4 Press B or b to adjust the bars on the top
and bottom of the menu if they are
slanted, then press
(KV-SW21M81only).
If no adjustment is necessary, then press .
5
To prevent this “Initial Setup” menu from
appearing again when you turn on the TV
by pressing !, press V or v to select “No”,
then press
.
To allow this menu to appear again, select
“Yes”, then press
.
Tip
• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.
Setting up your TV (“Initial Setup”) (continued)
End Select Confirm
Select Confirm
Exit Select Confirm
Exit Select Confirm
Exit Select Confirm
01GB04INS-AFRTun.p65 8/11/05, 4:28 AM 6
Black