Panasonic TYSP37P8WS - Manual (Page 2)

2
English
CAUTION
After installing the speakers, do not hold or move the display by lifting the speakers.
• The mounting brackets may get damaged, and personal injury may result.
Do not suspend the speakers.
• Personal injury may result if the speakers fall off. Take particular care to ensure the safety of children.
These speaker are for use with the Plasma Display.
• If connecting them to some other amplifier, make sure that the maximum input is within the rated level(8W). If the
input level is exceeded , fire may result.
Make sure that all screws are tightened securely during installation.
• Ensure that the installation is carried out correctly to prevent the speakers from becoming detached, and possibly
causing possible personal injury.
Safety Precautions
Mounting bracket
(right) .......................2
Mounting bracket
(left) .........................2
Bracket mounting
screw .....................12 Sponge ....................2 Speaker cable
(20 cm) ...................2
Accessories
• Attach the sponges to the surfaces which are in
contact with the Display.
• Clean the surfaces before attaching the sponges.
• Attach the sponge along the rib on the speaker.
1. Attach the sponges to the
speakers.
2. Attach the mounting
brackets to the speakers.
Installation
Installing to the Plasma Display
For right For left
Mounting
brackets
(right)
Mounting
brackets
(left)
Bracket mounting
screws Bracket mounting
screws
Speaker (Ieft) Speaker (right) Trim
Sponges
rib
Side of the
speaker
• Secure the top and bottom mounting bracket by
tightening the bracket mounting screw.
• As shown in the enlarged views, adjust the
speakers so that there is some clearance between
them and the display by sliding the right speaker
to the right, and the left speaker to the left, and
then secure the bracket mounting screws.
• Securely tighten the bracket mounting screws.