Panasonic TYST42PX5W - Manual (Page 3)

3
English
Assembling the pedestal / Setting-up
Assembly screw
...........................4
Assembly screw
(Black screw) ....4
Pole ...................2 Base ..................1
Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.
2. Securing the poles
Use the assembly screws to secure the poles
firmly to the bottom of the base.
Accessories for pedestal assembly
Assembling the pedestal
The numbers (such as ) in the explanatory text indicate part numbers in the table of accessories.
Setting-up
1. Installing the poles
2. Securing the television unit
Use the assembly screws (Black screw) to
fasten securely.
Lift the television unit above the pedestal base,
with the back of the display unit on the same side
as the Nameplate. Then align the holes in the
television unit with the poles of the pedestal and
lower the television unit into place.
Spread a clean cloth or similar material over a level
floor or base, and place the Television unit on it
face down.
Assemble the poles correctly by referring to the illustrations below.
Base
Pole
Pole
For 42˝ television
(Outside)
For 37˝ television (Inside)
Pole
Pole
Base
Front
Television unit
Front
Rear
Nameplate
* Carry out work on
a horizontal and
level surface.
Pole
Pedestal
1. Setting up the Television unit
Television
Cloth or similar