Panasonic TYST65PV500 - Manual (Page 3)

3
English
Parts for assembly
(Be sure to check the parts before assembling)
Screws (6)
M8 × 60 (with washer)
Bolts (2)
Clampers (2) Stand pins (2)
Stand poles (2) Base (1)
Assembling the pedestal
(Attach the speaker after installing the television on the fl oor-mounted stand)
(1) Insert the two stand pins into the top of the
base .
• The stand pins have a front and back.
(2) Firmly secure the bolts into the base rear.
B
F
B
D
D
Attaching the pedestal to the television
1
Place the base so that it is fl at.
To prevent damage to the base, place it on a fl at fl oor
or on a stand.
2
Attach and secure the stand pins.
Arrow marks are displayed on the back cover at the
locations shown below.
Align the stand pins
with these arrows, and install
the plasma television.
1
Attach the plasma television to the
pedestal.
(1) Insert the two stand poles into the stand base
from the rear of the plasma television, and
then use the screws to secure the stand poles
.
(2) Use the four screws to secure the stand poles
and plasma television.
2
Attach the stand poles.
Front
M8 × 20 (with washer)
A A
A
E
TY-ST65PV500_689.indb 3 TY-ST65PV500_689.indb 3 2005/09/13 10:46:58 2005/09/13 10:46:58