Panasonic DMPBDT310EG - Manual (Page 6)

6
VQT3B62
Connections and settings
STEP 1 : Connecting to
a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
STEP 2 : Connecting to
an amplifier/receiver
∫ Via an HDMI AV OUT terminal (High quality)
– [BDT310] : Use HDMI AV OUT MAIN terminal.
– It is possible to play back 3D videos and 3D still
pictures by connecting this unit with a 3D compatible
TV.
≥ Set “HDMI Audio Output” to “On”
([HOME]>“Setup”>“Player Settings”>“TV / Device
Connection”>“HDMI Connection”).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 11).
LAN
10BASE-T/100BASE-TX
AV OUT MAIN AV OUT SUB
COMMUNICATION
CAMERA
HDMI IN
HDMI cable
∫ Via an HDMI AV OUT terminal
– [BDT310] : Use HDMI AV OUT MAIN terminal.
– It is possible to playback 3D videos and 3D still
pictures when the connected TV and amplifier/
receiver are 3D compatible.
≥ Set “HDMI Audio Output” to “On”
([HOME]>“Setup”>“Player Settings”>“TV / Device
Connection”>“HDMI Connection”).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver ([HOME]>“Setup”>“Player
Settings”>“Sound”).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (> 11).
≥ When connecting to a non-3D compatible amplifier/
receiver, connect this unit to a TV via HDMI AV OUT, then
connect the TV and the amplifier/receiver, using HDMI
cables for the respective connections.
– Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV’s sound by
amplifier/receiver it is also required to connect the
amplifier/receiver and TV using an optical digital cable.
LAN
10BASE-T/100BASE-TX
AV OUT MAIN AV OUT S
ON
HDMI IN
HDMI IN
(ARC)
HDMI OUT
(ARC)
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
(6)
DMP-BDT310_110EG-VQT3B62.book 6 ページ ２０１１年５月１８日 水曜日 午後１２時３分