Panasonic SCNT10E - Manual (Page 7)

VQ
T
5A
8
9
EN
G
LI
S
H
7
Preparation
While charging this unit or after charging this unit, turn on the Bluetooth ® feature of
the device and place the device near this unit.
If you intend to use an NFC (Near Field Communication)-compatible Bluetooth ®
device, proceed to “ One-Touch Connection (Connecting by NFC)” (> 8).
For each Bluetooth ® device you want to connect to via Bluetooth ® , perform pairing
first.
∫ Pairing with Bluetooth
® device
1 Press [Í/I] to turn this unit on.
• The Bluetooth ® indicator (blue) blinks slowly.
• If this unit is being used for the first time (factory preset state):
The Bluetooth ® indicator (blue) blinks fast. → The unit will enter pairing standby.
→ Skip to step 3.
2 Press and hold [ ] until the Bluetooth ® indicator (blue) blinks
fast.
• The unit will enter pairing standby.
3 Select “SC-NT10” from the Bluetooth ® device’s Bluetooth ®
menu.
• When the Bluetooth ® device is paired and connected, the Bluetooth ® indicator (blue)
on the unit lights up.
• If prompted for a passkey, input “0000”.
• If the Bluetooth
® device need to operate the Bluetooth ® pairing setting and the
Bluetooth ® connecting setting, operate both settings.
4 Start playing back music, a movie, etc. on your Bluetooth ®
device.
• Adjust the volume using the [VOL -/VOL +] buttons on the unit.
When the maximum or minimum volume is reached, you will be notified by a beep
sound.
∫ Listening to audio from a paired device
When this unit is turned on, the Bluetooth ® indicator (blue) will blink slowly indicating
that the unit is in connection standby mode. Please perform Steps 3 and 4.
• When the power is turned on, this unit is connected to the last-used Bluetooth ® device. At this
point, please perform Step 4.
Listening to audio from a Bluetooth
®
device
Connecting via Bluetooth
®
menu
7
SC-NT10_VQT5A89.book 7 ページ ２０１３年７月８日 月曜日 午前１０時３分