AT&T PLUG&SHARE 6602G - Manual (Page 2)

Table of Contents
AT&T Plug&Share ™ Wireless USB Adapter 54 Mbps 6602G 2
Table of Contents
INTRODUCTION..........................................................................3
Overview ........................................................................3
Package contents............................................................3
System requirements ......................................................3
DRIVER & ADAPTER INSTALLATION ......................................4
Step 1: Install driver & configuration utility......................4
Step 2: Install wireless adapter ......................................4
Step 3: Recognize the hardware ....................................4
CONFIGURE ADAPTER FOR YOUR NETWORK ....................5
Installation Wizard ..........................................................5
Test Internet access ........................................................6
Link Info screen ..............................................................7
Configuration screen ......................................................8
Security screen ..............................................................9
Site Survey screen........................................................10
ENABLE FILE AND PRINTER SHARING ................................10
File & print sharing for Windows ® XP ............................11
File & print sharing for Windows ® 2000 ........................18
File & print sharing for Windows ® Me and 98 SE ........24
TROUBLESHOOTING ..............................................................30
GLOSSARY ..............................................................................32
TECHNICAL SPECIFICATIONS ..............................................37
CARE AND MAINTENANCE ....................................................37
Before you begin
• If you have a Windows ® XP or Windows ® 2000 operating
system, and you are installing this adapter on a PC you
use at work, you must have “Administrator Rights”. This is
normally determined by your IT person at work.
• If you have used an earlier AT&T 802.11b Series adapter
(or one by another manufacturer), you must uninstall all
drivers and utilities before installing your new adapter. If
your system has a built-in wireless adapter, you must dis-
able it before installing your new adapter.