Attaching/detaching the lens – Panasonic HNS043E User Manual

Page 6

Advertising
background image

6

VQT5E44

≥ When flash recording with a close subject, the

light of the flash will be blocked by the lens and
part of the picture may be dark. Check the
distance from the subject when recording.

≥ Operating sounds may be recorded when auto-

focusing during motion picture recording. If
operating sounds become bothersome, we
recommend setting to manual focus (MF) and
fixing focus before recording to avoid recording
the lens noise.

≥ If you set the [O.I.S.] to [ON] when recording a motion

picture, operating sounds may be recorded. If they
become bothersome, we recommend setting the [O.I.S.]
switch to [OFF] and mounting the camera on a tripod.

≥ The aperture can be adjusted with the aperture

ring only when a Panasonic digital camera is
attached to the lens. (As of January 2014)

Attaching/Detaching the Lens

Check that the camera is
turned off.
≥ Remove the lens rear cap from

the lens.

Attaching the Lens

Align the lens fitting
marks

A

on the

camera body and the

lens and then rotate
the lens in the

direction of the arrow

until it clicks.

• Do not press the lens release button B when

you attach a lens.

• Do not try to attach the lens when holding it at an

angle to the camera body as the lens mount may
get scratched.

• Check that the lens is attached correctly.
• Be sure to remove the lens cap when recording.

VQT5E44_E.book 6 ページ 2014年1月7日 火曜日 午後7時58分

Advertising