Panasonic CZRWSU2 - Manual (Page 11)

5. Operation
EN-7
EN
Power: Turn on the power of the indoor unit at least 14 hours
before operation.
1. Press .
2. Press and select from among Auto , Heat , Dry ,
Cool and Fan .
3. Press and select the desired speed.
If set to Auto , the fan speed switches automatically. (Auto does
not work when in the Fan mode.)
4. Press one of the buttons and set the desired
temperature.
Temperature settings cannot be made when in the Fan mode.
MAX MIN
Auto 27 17
Heat 30 16
Dry / Cool 30 18
Stop: Press .
When the unit is stopped with the remote control, even though the
compressor of the outdoor unit stops, the fan on the outdoor unit
may continue to run for a while.
Auto , Heat , Dry , Cool , Fan
Models that only provide the cooling function cannot operate in the auto or heating modes.
1
4
2
3
Instruction_honbun_all.indb EN-7 Instruction_honbun_all.indb EN-7 2011/04/18 17:54:34 2011/04/18 17:54:34