Radio, En g l is h english – Panasonic SCHC27 User Manual

Page 7

Advertising
background image

E

N

G

L

IS

H

ENGLISH

RQT9679

7

7

Radio

30 FM stations can be preset.

Preparation
Connect the FM indoor antenna (Z page 5).

Press [RADIO] to select “FM”.

Automatic presetting

1

Press [PLAY MENU] to select “A.PRESET”.

2

Press [R, T] to select “LOWEST” or “CURRENT”

frequency.
LOWEST :

To begin auto preset from the lowest
frequency.

CURRENT : To begin auto preset from the current

frequency  .

To change the frequency, refer to “Manual tuning and

presetting”.

3

Press [OK] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order.
To cancel, press [8].

Manual tuning and presetting

1

Press [PLAY MENU] to select “TUNEMODE”.

2

Press [R, T] to select “MANUAL” and then press

[OK].

3

Press [2/3] or [5/6] to tune in to the

station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“STEREO” is shown when the system is tuned in to a
stereo broadcast.

To preset the station

4

Press [OK].

5

Press [R, T] to select a preset number.

6

Press [OK].
Do steps 3 through 6 again to preset more stations.

Note:
A station previously stored is overwritten when another
station is stored in the same preset number.

Selecting a preset station

1

Press [PLAY MENU] to select “TUNEMODE”.

2

Press [R, T] to select “PRESET” and then press

[OK].

3

Press [2/3] or [5/6] to select the preset

station.

Disc

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Some CD-R/RW cannot be played because of the

condition of the recording.

• MP3 files are defined as tracks and folders are defined as

albums.

• This system can access up to:

– CD-DA : 99 tracks

– MP3 :

999 tracks, 255 albums (including root folder)
and 20 sessions

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

• Recordings will not necessarily be played in the order you

recorded them.

USB

• Compatible USB devices which are defined as mass

storage class:

– USB devices that support bulk-only transfer

– USB devices that support USB 2.0 full speed

• Files are defined as tracks and folders are defined as

albums.

• Track must have the extension “.mp3” or “.MP3”.
• This system can access up to:

– 255 albums (including root folder)

– 2500 tracks

– 999 tracks in one album

• CBI (Control/Bulk/Interrupt) is not supported.
• NTFS file system is not supported (only FAT 12/16/32 file

system is supported).

• Some files can fail to work because of the sector size.

“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or
iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.

MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.

HC27_EC1_1en.indd 7

HC27_EC1_1en.indd 7

5/14/2012 4:13:34 PM

5/14/2012 4:13:34 PM

Advertising
This manual is related to the following products: