Troubleshooting/q&a – Panasonic TYEW3D3LE User Manual

Page 11

Advertising
background image

E

NGLISH

11

Troubleshooting/Q&A

Check the followings first. If they do not solve the problem,

please contact the place of purchase.

Images are not 3D.

Is the 3D Eyewear mode set to 3D?

Slide the tab once to the 3D/2D position to change the mode
between 3D and 2D.

Are the image settings switched to 3D images?

Refer the television operating instructions and.

Is there a sticker or other such item blocking the infra-

red reception section on the 3D Eyewear?

If the eyewear stops receiving infra-red signal from the television,
the power automatically switches off after 5 minutes.

Individual differences may occur in which the

3D images are difficult to see, or cannot be seen,

especially in users that have a different level of

eyesight between the left and right eyes.

Take the necessary steps (wearing glasses etc.) to correct your
eyesight before use.

The power of the 3D Eyewear turns off by itself.

Are there any objects between the eyewear and

television?

Is there a sticker or other such item blocking the infra-

red reception section on the 3D Eyewear?

If the eyewear stops receiving infra-red signal from the television,
the power automatically switches off after 5 minutes.

The indicator lamp does not light when the power

switch is set to “ON”.

Is the 3D Eyewear sufficiently charged?

If the indicator lamp does not light at all, the battery is completely
flat. Perform the battery charging operation.

(continued overleaf)

Advertising
This manual is related to the following products: