Assembling & setting up the pedestal, Accessories for pedestal assembly 8, Assembling the pedestal – Panasonic TYST50PX500 User Manual
Page 8
Assembling & setting up the pedestal
Accessories for pedestal assembly
8
English
Short screw
...................4
Long screw
...................4
Pole...........2
Base ...........1
A
B
Band .........2
Assembling the pedestal
Using the four short screws
, securely fasten the left and right poles to the base, as shown in the illustration below.
B
A
A
B
Pole
Pole
Pole
(
)
Align the stamped marks.
Short
screws
For 42'', 50'' plasma television
Front
Pole
(
)
Align the stamped marks.
For 37'' plasma television
Front
Pole
(
)
Align the stamped marks.
For 42'', 50'' plasma television
Front
Pole
(
)
Align the stamped marks.
For 37'' plasma television
Front
Points to note during installation
• Insert the mains plug into a mains socket which is close and easily accessible for the plasma television.
• Provide adequate ventilation so that the temperature around the television does not rise above 40°C (104 °F).
If there is insufficient movement of the air inside the display, heat may build up inside the television and fire
may result.
1) Fit the 37- and 42-inch plasma displays to the TY-ST42PX500, and the 50-inch plasma display to the TY-ST50PX500.
2) The illustrations show the TY-ST42PX500. The TY-ST50PX500 is not shown as it is similar in appearance.