Acroprint ES1000 - Manual (Page 6)

iv
• Do not disassemble or modify the unit. High voltage is present inside
that may lead to an electric shock.
• Do not use any voltage of the power source other than designated.
• Do not share a single outlet with another plug. This may lead to a fire or
electric shock.
• Do not damage, break, or modify the power cord.
• Do not put heavy objects on, pull, or forcefully bend the cord. These
may damage the cord, possibly resulting in a fire or electric shock.
• Do not plug or unplug the unit with a wet hand. This may lead to an
electric shock.
• Do not place the unit on an uneven or tilted surface. This may result in
injuries due to the unit dropping or falling off.
• Do not put a water-filled container or a metal object on top of the unit. If
water is spilled or the metallic object slips inside, a fire or electric shock
may occur.
• Do not install the unit in a humid or dusty environment. This may result
in damage or malfunction.
• Do not place the unit near a kitchen counter or humidifier. Oil, smoke,
or steam generating from them may cause fire or electric shock.
• Do not yank the power cord to disconnect from the outlet. Hold the plug
with your hand to do so, or the cord may be damaged. This may lead to
a fire or electric shock.
• Do not insert or drop any other timecard than specified into the slot.
Such misuse may result in damage or malfunction.
• Do not come in contact with the print head. This may result in personal
injury.
A LERT D ESCRIPTION