Panasonic DMWMCTZ1E - Manual (Page 16)

16
VQT0X68
Preparation
-Attaching the Digital Camera- (continued)
3
Insert the silica gel (supplied).
≥ Always use new silica gel.
≥ When inserting the silica gel, bend it as shown in the illustration below
and then insert it as far as possible. If you close the Case with the silica
gel not fully inserted, the silica gel will get caught in the O-ring causing
water leakage.
≥
If the air temperature is high and the water temperature is low, condensation
may appear inside the Case. To prevent condensation, make sure that the silica
gel (supplied) does not come into contact with the digital camera lens. To
prevent the Case from becoming fogged up, insert the silica gel about 1 to
2 hours before using the Case.
Silica gel
VQT0X68.book 16 ページ ２００６年３月１３日 月曜日 午前１０時５分