Panasonic EY7840 - Manual (Page 10)

- 10 -
10) Be careful not to get dust inside the
chuck.
11) Do not touch the rotating parts to
avoid injury.
12) Do not continue to use the tool for
a long time. Stop using the tool
from time to time to avoid that the
temperature of the motor rises too
high.
13) Do not drop the tool.
14) Do not put the tool on the place
where the chuck is depressed. The
bit may come off from the chuck
and fall down when the chuck is
depressed. It may cause injuries.
Symbol meaning
V Volts
Direct current
n
0
No load speed
…min -1
Revolutions or
reciprocation per minutes
Rotation with hammering
Rotation only
To reduce the risk of
injury, user must read
and understand instruc-
tion manual.
For indoor use only.
WARNING:
• Do not use other than the
Panasonic battery packs that are
designed for use with this
rechargeable tool.
•Panasonic is not responsible for
any damage or accident caused
by the use of the recycled battery
pack and the counterfeit battery
pack.
• Do not dispose of the battery pack
in a fire, or expose it to excessive
heat.
• Do not drive the likes of nails into
the battery pack, subject it to
shocks, dismantle it, or attempt to
modify it.
• Do not allow metal objects to
touch the battery pack terminals.
• Do not carry or store the battery
pack in the same container as
nails or similar metal objects.
• Do not charge the battery pack in
a high-temperature location, such
as next to a fire or in direct
sunlight. Otherwise, the battery
may overheat, catch fire, or ex-
plode.
• Never use other than the dedi-
cated charger to charge the bat-
tery pack. Otherwise, the battery
may leak, overheat, or explode.
• After removing the battery pack
from the tool or the charger, al-
ways reattach the pack cover.
Otherwise, the battery contacts
could be shorted, leading to a risk
of fire.
•When the Battery Pack Has De-
teriorated, Replace It with a New
One. Continued use of a dam-
aged battery pack may result in
heat generation, ignition or bat-
tery rupture.