Panasonic RFU350 - Manual (Page 6)

RQT8946
6
6
Using the timer
You can set the times at which to turn the power on and off and set the station and volume level while the power is on.
The unit must be off for the timer to operate.
Checking the timer settings when
the power is off
ON18 : 00 OFF20 : 00
�
What has been set is now
displayed. VOLUME 28
Setting the timer settings to OFF
These steps can be taken while the power is on.
TIMER-PLAY OFF
Press and hold.
Press.
Even when the timer settings are set to OFF, the timer
time settings remain in the memory so that when the
timer settings are next set to ON, the timer function will
be activated at the set times.
Note
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came with the cloth
carefully.
Preparation: Setting the clock. ( page 5)
Select the broadcast station. ( page 4)
Adjust the volume. ( page 4)
• Once the timer times are set, they need not be set
the next time.
• To change the times, perform time setting procedure
again.
• The “[TIMER]” display flashes during a timer operation.
Note
ON 0 : 00 OFF 0 : 00
1. Setting the timer times
If this display appears ...
ADJUST CLOCK
Set the clock.
ON 18 : 00 OFF 0 : 00
�
Select the ON time.
ON18 : 00 OFF20 : 00
�
Select the OFF time.
If this display appears ...
CHANGE OFF-TIMER
The same time has been
set for both the ON time
and OFF time. Set the timer
times again.
ON18 : 00 OFF20 : 00
�
Press.
ON18 : 00 OFF18 : 00
Press.
Press and hold.
2. Setting the timer settings to ON
[TIMER]
18 : 00
Press.
(Turn the unit off)
The unit must be off for the
timer to operate.
Setting the timer settings to ON
ON18 : 00 OFF20 : 00
� Press.
If this display appears ...
ADJUST CLOCK
Set the clock.
ADJUST TIMER
Set the timer times.
The illustrations show
RF-U350.
RF_U350_8946_E.indb 6 2007/02/02 13:04:21