English, Specifications – Panasonic SCPMX7EG User Manual

Page 11

Advertising
background image

11

11

E

NGLISH

VQ

T

4

X4

9

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1

Disconnect the AC mains lead.
Wait 3 minutes before you continue with step 2.

2

While you press and hold [Í/I] on the main unit,
connect the AC mains lead again.
“- - - - - - - - - - - -” is shown.

3

Release [Í/I].
All the settings are set back to the factory preset.

It is necessary to set the memory items again.

When other Panasonic equipment responds to the

remote control of this system, change the remote control

code for this system.

To set the code to “Remote 2”

1

Press and hold [CD] on the main unit and [2] on
the remote control until “Remote 2” is shown.

2

Press and hold [OK] and [2] for a minimum of
4 seconds.

To set the code to “Remote 1”

1

Press and hold [CD] on the main unit and [1] on
the remote control until “Remote 1” is shown.

2

Press and hold [OK] and [1] for a minimum of
4 seconds.

Specifications

RMS output power stereo mode

Front Ch (both ch driven)

60 W per channel (3 ™), 1 kHz, 10% THD

Total RMS stereo mode power

120 W

Frequency modulation (FM)

Preset memory

30 stations

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals

75 ™ (unbalanced)

“iPod_Port” connection

DC OUT 5 V 2.1 A (max)

USB standard

USB 2.0 full speed

Media file format support

MP3 (*.mp3)

USB device file system

FAT12, FAT16, FAT32

“iPod_Dock” connection

DC OUT 5 V 1.0 A (max)

Headphones jack

Stereo, Ø 3.5 mm jack

AUX input (rear)

Pin jack

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3)

Pick up

Wavelength 790 nm

(CD)

Laser power

CLASS 1

NORSK

Bølgelengde 790 nm

(CD)

Laserstyrke

Ingen farlig stråling sendes ut

Audio output (Disc)

Number of channels

2 ch (FL, FR)

Speaker unit(s)

Woofer

14 cm cone type x 1

Tweeter

1.9 cm dome type x 1

Super tweeter

1.5 cm piezo type x 1

Impedance

3 ™

Dimensions (W x H x D) 161 mm x 238 mm x 262 mm

Mass 2.6 kg

Bluetooth

®

system specification

V 3.0

Wireless equipment classification

Class 2

Supported profiles

A2DP, AVRCP, GAVDP

Frequency band

2402 MHz to 2480 MHz

(Adaptive Frequency Hopping)

Driving distance

10 m Line of sight

Prospective communication distance

Measurement environment:

Temperature 25 oC / Height 1 m

Measure in “Mode 1”

Power supply

AC 220 V to 240 V, 50 Hz

Power consumption 60 W

Dimensions (W x H x D) 210 mm x 120 mm x 266 mm

Mass Approx. 3 kg

Operating temperature range 0°C

to

+40°C

Operating humidity range

35% to 80% RH (no condensation)

Note:

• Specifications are subject to change without notice. Mass

and dimensions are approximate.

• Total harmonic distortion is measured by the digital

spectrum analyzer.

Memory reset (initialisation)

Remote control code

Amplifier section

Tuner section

Terminals section

Disc section

Speaker section

Bluetooth

®

section

General

Power consumption in standby mode

(When the iPod/iPhone/iPad is not charging)

0.4 W (approximate)

Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product

is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorised Representative: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525

Hamburg, Germany
This product is intended for general consumer. (Category 3)

1731

SC-PMX7EG-VQT4X49.book 11 ページ 2013年1月25日 金曜日 午前10時31分

Advertising