Speaker installation option – Panasonic SCXH75EP User Manual
Page 20
20
RQ
T
9
59
4
ENGL
ISH
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
∫ Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥ Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
Speaker installation option
Attaching to a wall
e.g., Surround speaker
DO NOT
DO
≥ In this position, the speaker will
likely fall if moved to the left or
right.
≥ Move the speaker so that the
screw is in this position.
[XH70] Front/Surround speaker
[XH75]
Surround speaker
[XH70] Center speaker
[XH75]
Center speaker
At least 30 mm
‰
7.0 mm to
‰
9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
‰
4.0 mm
A 18 mm
B 99 mm
C 40 mm
D 40 mm
A 24 mm
B 116 mm
C 40 mm
D 40 mm
E 17 mm
F 64 mm
G 24 mm
H 96 mm
I 27 mm
E 18 mm
F 65 mm
G 24 mm
H 95.5 mm
I 27 mm
[XH75]
Front speaker
Attach to a wall without the base and the stand
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g.
[XH75]
Front speaker
J 65 mm
K 349 mm
L 110 mm
M 51 mm
N 51 mm
Wall
Screw eye
(not supplied)
String (not supplied)
Less than
10 cm
[XH75]
Reattaching the speaker cable
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm.
20
SC-XH70-75 EP_RQT9594-R_eng.book Page 20 Wednesday, December 14, 2011 9:05 AM