Panasonic KXTCA151EX - Manual (Page 5)

5
Registering a Handset to the Base Unit
• You must register the Handset to the base unit before use.
• To exit the operation, press at any time.
1 Press JOYSTICK (or move).
2 Select “Setting Handset”.
3 Select “Registration”.
4 Select “Register H/set”.
5 Press and hold on the Base unit (for about 3 seconds) until
the tone sounds.
If all registered handsets start ringing (Paging), press
to stop
paging then start over again.
6 Select the desired base unit.
7 Enter 4-digit Base Unit PIN after “Enter Base PIN” is displayed.
Factory preset 0000
8 Press JOYSTICK.
When a handset is registered successfully, a
confirmation tone sounds and “ ” icon lights.
TCA151EX.book Page 5 Monday, June 9, 2003 7:14 PM