AT&T Definity 7314H User Manual
Page 31
To set the display clock
Note: When your voice terminal is first powered up, or
when power to the voice terminal is interrupted,
12:00a Su 01-01
flashes on the display.
1
Press
Disp-Norm
if you are in Normal mode,
otherwise start at step 2
Green light goes out
Local mode is activated, and time related
information is displayed
2
Press
Set
until time, day and date information is
displayed
Time related information is displayed
Time (hh:mma/p) is flashing
3
Press
Timer/Fwd
or
Timer/Rev
until the correct
time appears
4
Press
Set
to save the correct time and to display
the day
Day is flashing
5
Press
Timer/Fwd
or
Timer/Rev
until the correct day
appears
6
Press
Set
to save the correct day and to display the
date (mm-dd)
Date is flashing
7
Press
Timer/Fwd
or
Timer/Rev
until the correct
date appears
8
Press
Set
to save the correct date
9
Press
Time/Exit
to save time, day and date
29