AT&T Definity 7314H - Manual (Page 35)

To display calling party
information for an
incoming internal call,
when connected to
another call 1 Automatic Incoming Call Identification is activated
Name of the calling party and miscellaneous
identifier (if applicable) are displayed on line 1
2 Press Scroll
Extension of the second or subsequent caller is
displayed on line 2
3 Press Hold to place first call on hold
4 Receive the second call
Note: If you remain on the first call and the
incoming caller disconnects or you do not answer the
incoming call within 30 seconds, the display will
revert to Normal mode, and the information from the
first call will be displayed.
To display a redirected
call at the answering
party voice terminal 1 While on-hook
Green light (next to the call appearance with the
incoming call) flashes
Normal mode is activated, time related
information is cleared, and and the green light
(next to the disp-norm button) goes on steadily
Name of the original called party and redirection
character (<) are displayed on line 1
2 Press Scroll
Name of the calling party and redirection reason
code are displayed on line 2 (See Key Words to
Know for a list of redirection codes.)
3 Pick up handset to receive call
33