About bluetooth – Panasonic SCHC38EC User Manual

Page 13

Advertising
background image

13

RQT9746

EN

GL

IS

H

“NO PLAY”

≥ A CD that is not in CD-DA or MP3 format is inserted. It cannot be

played.

≥ If there are more than 255 albums or folders (audio and

non-audio), some of the MP3 files in these albums may not be
read and played. Transfer these music albums to another USB.
Alternatively, reformat the USB device and save these music
albums prior to saving the other non-audio folders.

“NOT SUPPORTED”

≥ You have connected an iPod/iPhone/iPad that cannot be played

(l 14).

≥ If the iPod/iPhone/iPad is compatible, turn it on and connect it

correctly.

“READING”

≥ The unit is checking the CD information. After this display has

disappeared, start operating.

“REMOTE ” (“ ” stands for a number.)

≥ The remote control and this unit are using different codes. Change

the code on the remote control.
– When “REMOTE 1” is displayed, press and hold [OK] and [

]

for more than 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK] and [CD/

RADIO] for more than 4 seconds.

About Bluetooth

®

Frequency band used

≥ This unit uses the 2.4 GHz frequency band.

Certification of this device

≥ This system conforms to frequency restrictions and

has received certification based on frequency laws.
Thus, a wireless permit is not necessary.

≥ The actions below are punishable by law in some

countries:
– Taking apart or modifying the unit.
– Removing specification indications.

Restrictions of use

≥ Wireless transmission and/or usage with all

Bluetooth

®

equipped devices is not guaranteed.

≥ All devices must conform to standards set by

Bluetooth SIG, Inc.

≥ Depending on the specifications and settings of a

device, it can fail to connect or some operations can
be different.

≥ This system supports Bluetooth

®

security features.

But depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

®

device.

Range of use

≥ Use this device at a maximum range of 10 m. The

range can decrease depending on the environment,
obstacles or interference.

Interference from other devices

≥ This unit may not function properly and troubles such

as noise and sound jumps may arise due to radio
wave interference if this unit is located too close to
other Bluetooth

®

devices or the devices that use the

2.4 GHz band.

≥ This unit may not function properly if radio waves

from a nearby broadcasting station, etc. is too
strong.

Intended usage

≥ This unit is for normal, general use only.
≥ Do not use this system near an equipment or in an

environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc).

Panasonic bears no responsibility for data and/
or information that is compromised during a
wireless transmission.

SC-HC38_EC~RQT9746-R.book 13 ページ 2012年12月28日 金曜日 午後6時53分

Advertising