Audiovox DVD1500 - Manual (Page 28)

28 DVD1500
The player accepts input signals(refer to item 2, fol-
lowing) and provides output signals through the AV
signal jacks.
When IN is selected (left) on the INPUT SELECT
switch,the player is ready to accept signal inputs
from an outside source. When OUT is selected
(right), data may be sent to a variety of devices in-
1
cluding television, amplifier, VCR, tape recorder, video
camera, laser disc player, and so on. Even with the out-
put enabled, the player will continue to display video on
its screen and broadcast sound from its speakers.
NOTE
Copy Guard Protection:
When the DVD player audio/video output is plugged into the A/V
input jacks of a Video Cassette Recorder (VCR) using the audio/
video cables, (red, white and yellow RCA jacks) poor picture
quality may result (i.e. screen on TV getting brighter and dim-
mer) due to Macrovision copy guard protection contained on
some DVD discs.
In IN mode, the player will accept inputs from the above
mentioned devices for broadcast on its onboard LCD
screen and speakers. Input signals are given precedence
over any disc currently running on the player.
Please note when installing the AV wires that the white
wire is designated for the left speaker, red wire for the
right speaker, and yellow wire for the video signal.Correct
installation at both ends will ensure proper video and au-
dio replication on the DVD player.
Player Controls (5)
5 Player Controls (5)
AV Signal Jacks
2 3
1