Audiovox DVD1500 - Manual (Page 73)

73 PD-258 DVD1500 DVD1500
Configuration I: AV Signal Output from AV Jack
AV signal outputs
AV signal inputs
Using the AV signal cables included with this player or other cables
of the same standard you are ready to export to the following types
of peripherals:
1. Television set with AV input jacks
2. VCRs (Recording is not permitted)
3. V8 and VHS-C video cameras (Recording is not permitted)
4. Overhead projectors
NOTE
When the DVD player audio/video output is plugged into the A/V input jacks
of a Video Cassette Recorder (VCR) using the audio/video cables, (red, white
and yellow RCA jacks) poor picture quality may result (i.e. screen on TV
getting brighter and dimmer) due to Macrovision copy guard protection con-
tained on some DVD discs.
Please note that AV signal cables are bundled in sets of three different colors. The white cable is intended to carry
left speaker audio, the red cable right speaker audio, and the yellow cable image signal data. The three wires are
not structurally different, but the colors are intended to aid in correct installation. Please make sure that each output
is plugged into the correct peripheral input (e.g., yellow output plugs into yellow input, etc.). Also, most modern
electronic equipment must be manually switched before input signals can be processed and displayed. Please refer
to the relevant owners’ manual to confirm how this switch should be accomplished.
10 Connecting Audio/Video (AV) Peripherals (I)