Panasonic SCHC39EC - Manual (Page 4)

4
RQT9944
Control reference guide
1 Standby/on switch (Í/I) (Í)
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small
amount of power.
2 Select the audio source
On this unit:
On the remote control:
[ ]: “BLUETOOTH”
[USB/CD]: “CD” ,. “USB”
3 Basic playback control buttons
4 Adjust the volume (0 (min) to 50 (max))
5 Open or close the sliding door
6 Bluetooth ® -pairing button
≥ Press to select “BLUETOOTH” as the audio source.
≥ Press and hold to enter pairing mode (
l 7) or
disconnect a Bluetooth ® device (l 8).
7 NFC touch area (l 7)
8 Port for USB devices / DC OUT terminal (l 6)
9 AUX IN jack (l 5)
10 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
11 Display
12 Sliding door
13 Enter setup menu
14 Change the displayed information
15 Enter sound menu
16 Dim the display panel
Press again to cancel.
17 Mute the sound
Press again to cancel. “MUTE” is also cancelled when the
volume is adjusted or the unit is turned off.
18 Enter playback menu
19 Selection/OK
Top view
“CD” """"-. “BLUETOOTH” """"-. “USB”
^"""--" “AUX” (""-"" “FM” ("-""-}
[RADIO/AUX]: “FM” ,. “AUX”
∫ Using the remote control
Insert the battery so the terminals (i and j) match those
in the remote control.
Point it at the remote control signal sensor on this unit.
≥ To avoid interference, please do not put any objects in front of
signal sensor.
(Alkaline or manganese
battery)
SC-HC39EC~RQT9944-R.book 4 ページ ２０１４年１月１７日 金曜日 午後３時５８分