Agilent Technologies HSSI WanProbe J3916A - Manual (Page 107)

Bootp Server Configuration
Configuring the Bootptab File
87
NOTE Only bootpquery with bootptab entries include the ba tag.
Server Verification Process
HP-UX
Bootp Server
Test the Bootp process by entering one of the following:
For HP-UX 9.x:
/etc/bootpquery <hardware address>
For HP-UX 10.x and 11.x:
/usr/sbin/bootpquery <hardware address>
Where <hardware address> is the MAC address of the HP-
UX workstation’s LAN interface.
Solaris
Bootp Server If available, test the Bootp process by entering:
/etc/bootpquery <hardware address>
where <hardware address> is the MAC address of the Solaris
workstation’s LAN interface.
PC
Bootp Server Check the C:\bootpd\bootpd.log file for the entry
“Starting bootpd...”
Table 4-4: Bootp Process Verification