Cassettes, Playback recording, English – Panasonic SCAK321 User Manual

Page 14: Press [ ;: , tape, Press [ ; : , tape] to start playback, Select the source to be recorded, Press [ a , rec] to start recording, Reducing noise when recording am, Front side

Advertising
background image

RQT7340

14

ENGLISH

You can use either deck 1 or deck 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.

1

Press [;:, TAPE].

The unit comes on.
If a cassette was loaded, play starts automatically (One touch play).

2

Press [c, DECK 1] or [c, DECK 2] and insert the
cassette.

Insert with the side to be played
facing towards you and the
exposed tape facing down.
Close the holder by hand.

3

Press and hold [PLAY MODE] on the remote control to
select the reverse mode.

Every time you press and hold the button:

: One side is played.
: Both sides are played.
: Both sides are played repeatedly until [ L, STOP] is

pressed.

To listen to 2 tapes consecutively
Load a tape into each deck and select “

”. Both tapes will be

played repeatedly until [L, STOP] is pressed.

4

Press [; :, TAPE] to start playback.

Every time you press the button: / R

F -

F - : The forward side (front side) will play.
/ R : The reverse side will play.

To stop tape playback
Press [L, STOP].

To fast-forward or rewind
Press [g/REW/

3] (rewind) or [f/FF/4] (fast-forward).

To select between loaded decks
Press [DECK 1/2] (remote control: [PLAY MODE]).

Cassettes

Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.

Preparation:
Wind up the leader tape so recording can begin immediately.
Press [;:, TAPE] then [L, STOP] to select tape as the source.

1

Press [c, DECK 2] and insert the cassette to be
recorded.

The tape direction is automatically set to “F :”.

To record on the reverse side
Press [;:, TAPE] twice, then press [L, STOP]

2

Press and hold [PLAY MODE] on the remote control to
select the reverse mode.

Every time you press and hold the button:

: One side only records.

,

: Both sides record (forward

→ reverse).

” automatically changes to “

” when [ a, REC] is pressed.

3

Select the source to be recorded.

Radio recording:
Tune in the station. (A page 13)
CD recording:
1 Insert the CD(s) you want to record.

Press [:/J, CD] and then [L, STOP].

2 Prepare the desired CD recording mode.

Remote control only

To record programmed tracks (A do steps 1–3 on page 9
for CD-DA or steps 1–4 on page 10 for MP3).

To record specific CDs/tracks
1. For CD-DA, do steps 1 to 2 on page 8: “To listen to

specific CDs and tracks (CD Play Mode function)”.
For MP3, do steps 1 to 2 on page 9: “CD Play Mode
function for MP3”.
Ensure CD is stopped.

2. (MP3 only) For 1-ALBUM mode and 1-SONG mode:

Press [ALBUM ( or )] to select the album.

3. For 1-SONG mode: Press [ g, REW/

3] or [f,

4/FF] to select the track.

Tape-to-tape recording:
1 Press [;:, TAPE] and then [L, STOP].
2 Press [c, DECK 1] and insert the cassette you want to record.

4

Press [a, REC] to start recording.

To stop recording
Press [L, STOP].

If the tape finishes before the CD
The CD continues playing. Press [L, STOP] to stop it.

Reducing noise when recording AM

Remote control only
Hold down [PLAY MODE] while recording.
Every time you hold down the button: BP1

↔ BP2

Choose the setting with the least noise.

Note

Changes to volume and sound/field quality do not affect recording.

You cannot open deck 1 while recording.

You cannot fast-forward or rewind one deck while recording with
the other.

When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.

(Continued on next page)

Playback

Recording

Note

Tape playback is momentarily interrupted if you open the other deck.

Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.

Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.

Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.

Front side

VOL

VOL

VOL

VOL

7

8

9

0

10

6

SHI

SHIFT

CLOCK

CLOCK

TIMER

TIMER

/

/

PL

PL AY

REC

REC

AUTO OFF

O OFF

INTRO

INTRO

S.

S.SO

SOUND EQ

UND EQ PRE

RESET EQ

T EQ

MUT

UTING

ING

ENTER

ENTER

MARKER

MARKER

TITLE

TITLE

SEARCH

SEARCH

REW

FF

PROG

PROGRAM

AM

REP

REPE AT

AT

PLAY MODE

AY MODE

DISC

DISC

SPACE

SPACE

ABC

ABC

DEF

DEF

GHI

GHI

TUV

TUV

W X Y

W X Y Z

PQRS

PQRS

JKL

JKL

MNO

MNO

SLEEP

EEP

CD DISP

CD DISP

DIMMER

DIMMER

AL BUM

BUM

CURSOR

CURSOR

DEL

DEL

4

5

1

2

3

TAPE

TAPE

CD

CD

AUX

AUX

CLEAR

LEAR

TUNER

TUNER

BAND

ND

K A R A O K E

K A R A O K E

L, STOP

g/REW/3,

f/FF/4

PLAY MODE

-/J, CD

c, DECK 2

DECK 1/2

/ -, TAPE

g, REW/3,

f, 4/FF

KARAOKE,
PRESET EQ

SUPER
SOUND EQ

MIC VOL

PRESET EQ

c, DECK 1

[, REC

VOLUME

Microphone
(not included)

MIC

SHIFT

S.SOUND EQ

ALBUM (

or

)

Advertising