Panasonic KXTG7742 - Manual (Page 38)

Sub-menu 1 Sub-menu 2 Settings Code
Caller ID edit
(Caller ID number auto
edit) – 1: <On> 0: Off #214 44
Auto talk *14 – 1: On 0: <Off> #200 23
Set tel line *3 Set dial mode *1 1: Pulse
2: <Tone> #120 17
Set flash time *1, *15 0: 900 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms #121 24
Set line mode *1, *16 1: A 2: <B> #122 –
Call sharing *1 – 1: <On> 0: Off #194 24,
29
Registration Register handset – #130 42
Deregistration *2 – #131 42
Change language Display 1: <English>
2: Español #110 17
Voice prompt *1 1: <English>
2: Español #112 17
Main menu: “Customer support”
Operation Code
Displaying customer support Web address. #680 –
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 20).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
38 For assistance, please visit http://www.panasonic.com/help
Programming
TG7731_41_(en-en)_1121_ver.021.p38 38 2011/11/21 12:02:14