Audiovox SIR-PNP3 - Manual (Page 15)

128-7193A
15 of 32
-15-
Traffic Option
When the Traffic option is highlighted on the
“Choose Jump Setting” screen, the 3-letter
abbreviation of the currently selected city is also
shown; however, if no city has been selected,
NONE appears. To select a desired city, press
the Encoder knob when the Traffic option is high-
lighted, and the “Choose Traffic Market” screen
appears with a listing of abbreviated city names
in alphabetical order.
Rotating the encoder knob or pressing the
CH+/CH- button on the remote scrolls through
the city list, highlighting each city for selection.
When the desired city is highlighted, press the
Encoder knob to confirm selection. The city ID is
then saved for the Jump feature.
If the action is canceled without making a selec-
tion (by pressing MENU to return to main
menu), no city ID is saved. However, if a city is
selected, itcannot be deselected (i.e; return to
NONE status); however, the city can be replaced
with another city.
A city selection may not be available at a given
time. In this case, a pop-up screen is displayed
for 2 seconds indicating the city list is being up
dated, and the display then returns to the previ-
ous menu option.
NOTE: Current city abbreviations are presented in
APPENDIX A of this manual onPage 29.
Jumpset Option
When the “JumpSet” option is highlighted on the
“Choose Jump Setting” screen, and the Encoder
knob is pressed to select this option, the Jump but
ton can now be used as a JumpSet function. The