Audiovox SIR-PNP3 - Manual (Page 19)

128-7193A
19 of 32
Dimming control offers two choices; Manual and Au-
tomatic. In both cases, a 10-segment horizontal bar
graph is displayed with a “-” sign to the left, and a “+”
sign to the right. The current setting is indicated on
the bar graph by a reverse image segment.
The Font Type allows the user to select the appear-
ance of text on the Shuttle display.
FM Transmitter Options
The following adjustments are possible:
FM On/ Off
Frequency Selection
Frequency Setting:
Upon entering this mode, any FM transmitter
frequency can be chosen using the Category
Up/Down buttons for coarse (1.0MHz steps)
frequency selection, and the encoder knob for fine
(200kHz steps) frequency selection.
FM On/Off:
Upon entering this mode, rotating the
Rotary
Encoder knob to toggle between the FM ON
or FM OFF function/display selection. To select
and/or exit this function, press the Encoder
knob. (No button activity for 10 seconds will
also exit this function.)
-19-
NOTE: It is recommended that you turn the FM
Transmitter off if you are using the low level
audio outputs in your particular application.
For example, to increment and decrement a fre-
quency of 1.0MHz within the minimum
(88.1MHz) and maximum FM frequency range,
press the Category Up/Down button as
necessary to enter the desired range (e.g.,
89.1MHz to 90.1MHz); then use the encoder
knob to choose the desired frequency within
that range in 200kHz steps.
Press the select button to enter the new frequency
setting, or press the MENU button to return to the
menu options page with no change to frequency.
FM Transmitter Option
Frequency Selection
ON/OFF
ON/OFF
OFF
ON