Panasonic KXTGA300 - Manual (Page 5)

For assistance, please visit http://www.panasonic.com/help 5
Wall mounting
1 Drive the screws (not included) into
the wall.
2 Mount the charger ( A), then slide it
down ( B) and to the right (C) until it
is secure.
Specifications
General
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Handset
Frequency:
2.4 GHz – 2.48 GHz
Dimensions:
Approx. height 156 mm
× width 48 mm ×
depth 33 mm (6 1 /
8
inches × 1 7 /
8
inches × 1 5 /
16
inches)
Mass (Weight):
Approx. 150 g (0.33 lb.)
Power output:
125 mW (max.)
Power supply:
Ni-MH battery (3.6 V, 650 mAh)
Charger
Dimensions:
Approx. height 68 mm
× width 82 mm ×
depth 87 mm (2 11 /
16
inches × 3 7 /
32
inches × 3 7 /
16
inches)
Mass (Weight):
Approx. 80 g (0.18 lb.)
Power consumption:
Standby: Approx. 0.4 W
Maximum: Approx. 3.2 W
Power supply:
AC adaptor (120 V AC, 60 Hz)
Note:
L
Design and specifications are subject
to change without notice.
L The illustrations in these instructions
may vary slightly from the actual
product.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TGA300(e).fm Page 5 Tuesday, December 5, 2006 6:58 PM