Panasonic KXTG7732 - Manual (Page 33)

Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
n Scrolling through the display menus
1 M MENU N
2
Press MCN or MDN to select the desired main menu. a M SELECT N
3
Press MCN or MDN to select the desired item from the next sub-menus. a M SELECT N
4 Press MCN or MDN to select the desired setting. a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the operation, press M OFF N .
n Using the direct command code
1 M MENU N a Enter the desired code.
Example: Press M MENU N#101 .
2
Select the desired setting. a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the operation, press M OFF N .
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: “ Caller list ”
Operation Code
Viewing the caller list. #213 44
Main menu: “ Answering device ”
Sub-menu 1 Sub-menu 2 Settings Code
Play new msg.
( msg. : message)
– – #323 51
Play all msg. – – #324 51
Erase all msg. *1 – – #325 51
Greeting Record greeting *1 – #302 50
Check greeting – #303 50
Pre-recorded *1
(Reset to pre-recorded
greeting)
– #304 50
For assistance, please visit http://www.panasonic.com/help 33
Programming