ACR Electronics ZE-NES14 User Manual
Page 36
36
EQ
■
Audio control allows you to easily adjust the audio system to get the best possible
sound effect.
1. Enter the EQ setup mode
■
Press the [SEL] key on the remote control or touch the EQ icon in the user interface and
the following interface will display on the screen.
2. Select EQ mode
■
Touch the EQ selection bar repeatedly and the EQ mode will change.
3. Adjust EQ parameters
■
To adjust EQ parameters, touch and drag the EQ parameters adjustment bar.
4.
Adjust Front/Rear/Left/Right fader and balance
■
You can adjust front/back/left/right balance of the speaker to a desirable listening effect
according to the surroundings and your preference.
■
To adjust Front/Rear/Left/Right fader and balance, touch and drag the small white point
in the Fader/Balance adjustment area.
ƽ
NOTES:
■
The unit provides some EQ modes: User, Rock, Hip Hop, Dance, Latin, Rave, Urban,
Acoustic.
■
Different EQ reflects in different Bass, Treble and Mid level. The parameters of the EQ
modes has been preset and you can not change them besides 'User'.
■
The EQ mode will change to 'User' automatically when you adjust the value of BASS,
TREB or MID under the modes besides 'User'.
■
The value of SUB is independent of EQ mode and can be adjusted solely.
EQ selection
EQ parameters
Fader/Balance
adjustment area