Panasonic ESRT81 - Manual (Page 5)

5
English
Charge
Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the recharger
so that it is dry before charging it.
2
3
4
5
6
1 1
Attach the detergent cartridge and the water
tank to the self-cleaning recharger.
Page 7
2 2
Insert the appliance plug into self-cleaning
recharger.
3 3
Plug in the adaptor.
4 4
Pull up the arm until it clicks.
5 5
Remove the protective cap and then attach the
shaver.
Turn the shaver off before attaching.
Check that the outer foil is not deformed or damaged when you
are attaching the shaver.
6 6
Push down the arm until it clicks.
glows and charging starts.
•
•
•
If the plug symbol does not glow initially when the shaver is
plugged in, wait for a short while until it does.
Charging is completed when the indicators on the LCD panel
blinks.
(Max. 1 hour later)
You can keep the shaver attached to the recharger, or connected
to the adaptor, when not using it to maintain full battery capacity.
You cannot overcharge the shaver.
Charging without the self-cleaning recharger
You can also charge without the recharger.
1. Insert the appliance plug into the
shaver.
. Plug in the adaptor into a household
outlet.
You cannot operate the shaver while charging.
•
•
•