Frequently asked questions – Panasonic DMRE95H User Manual

Page 55

Advertising
background image

55

RQT7463

Re

fe

re

n

c

e

Frequently asked questions

Set up

Page

Disc

Recording

What equipment is necessary to play multi
channel surround sound?

≥

DVD-Video:

You can play DVD-Video multi channel surround by digitally connecting
an amplifier equipped with a Dolby Digital, DTS or MPEG decoder.

≥

DVD-Audio:

This unit plays DVD-Audio in 2 channels. You cannot play multi channel
surround sound.

9

—

Are the headphones and speakers directly
connected to the unit?

≥

You cannot directly connect to the unit. Connect through the amplifier

etc.

9

The television has a Scart terminal and
component video input terminal. Which
terminal should I connect with?

≥

If you have a regular television (CRT: cathode ray tube) we recommend

using the Scart terminal. You can enjoy high-quality RGB video from
this unit by connecting to an RGB compatible television.
If you have an LCD/plasma television or LCD projector compatible with
progressive scan, connect through the component video terminals for
high-quality progressive video.
If you have a CRT television or a multi system television using PAL
mode that is compatible with progressive scan, we cannot recommend
progressive output as some flickering can occur.

7, 8

Is my television progressive output
compatible?

≥

All Panasonic televisions that have 625 (576)/50I · 50P, 525 (480)/60I ·

60P input terminals are compatible. Consult the manufacturer if you
have another brand of television.

—

Can I play DVD-Video, DVD-Audio and
Video CDs bought in another country?

≥

You cannot play DVD-Video if their region number does not include “2”

or “ALL”.

Cover

Can a DVD-Video that does not have a
region number be played?

≥

The DVD-Video region number indicates the disc conforms to a

standard. You cannot play discs that do not have a region number.

—

Please tell me about DVD-R and DVD-RW
compatibility with this unit.

≥

This unit records and plays DVD-R. However, you cannot record onto

DVD-R discs that are finalized.

≥

This unit also records and plays high speed recording compatible discs.

≥

This unit does not record or play DVD-RW.

—

—
—

Please tell me about CD-R and CD-RW
compatibility with this unit.

≥

This unit plays CD-R/CD-RW discs (audio recording discs) which have

been recorded under one of the following standards: CD-DA, MP3 and
Video CD. Close the session or finalize the disc after recording.

≥

You cannot write to a CD-R or CD-RW with this unit.

14, 25

—

Can I record from a commercially
purchased video cassette or DVD?

≥

Most commercially sold video cassettes and DVD are copy protected;

therefore, recording is usually not possible.

—

Can a DVD-R recorded on this unit be
played on other equipment?

≥

You can play on DVD-R compatible players after finalizing the disc on

this unit; however, due to the condition of the recording, play may not be
possible.

43

How many times can I write to a DVD-RAM
disc?

≥

You can write to the disc approximately 100,000 times depending upon

the conditions of use.

—

Can I high speed transfer (dub) to a disc?

≥

You can record up to 32

k

recording speed to DVD-R and up to 24

k

recording speed to DVD-RAM when using a high speed compatible
disc.

35

Can I record digital audio signals using this
unit?

≥

You cannot record digital signals. The digital audio terminals on this unit

are for output only. (The audio recorded using the DV automatic
recording function from a digital video camcorder, for example, is
recorded digitally.)

—

Can a digital audio signal from this unit be
recorded to other equipment?

≥

You can record if using the PCM signal. When recording DVD, change

the “Digital Audio Output” settings to the following in the SETUP menu.
–PCM Down Conversion:

On

–Dolby Digital/DTS/MPEG: PCM
However, only as long as digital recording from the disc is permitted and
the recording equipment is compatible with a sampling frequency of
48 kHz.

≥

You cannot record MP3 signals.

47

—

Can I switch to bilingual broadcast during
recording?

≥

With HDD and DVD-RAM, you can. Just press [AUDIO].

≥

With DVD-R, you cannot. Change before recording with “Bilingual Audio

Selection” in the SETUP menu.

24
47

55

7463en.book Page 55 Tuesday, March 8, 2005 11:07 AM

Advertising