Panasonic TC17LA1 - Manual (Page 8)

8
Connections
Connecting the Antenna Cable to the Antenna Terminal
ANT
ANT
UHF Antenna
Antenna Terminal
(ANT or VHF/UHF)
VHF Antenna
Mixer
75 Ohm
Coaxial Cable
Coaxial Antenna Plug
Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended. Antenna Mode must be set to TV.
Incoming 75 Ohm Cable from Home Antenna / Cable Company
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.
Antenna / Cable Connection
Antenna cover removal and fitting
Removal
1
2
1.Grasp the cover at the
bottom end and initially
remove by pulling slightly
toward yourself.
2.Slowly pull out in the
downward direction.
TC-14LA1/ TC-17LA1
2
1
Removal 1.Grasp the opening and initially
pull the cover slightly towards
yourself to disengage the
claws (at 2 points on both the
left and right).
2.Slowly pull out in the
downward direction.
TC-20LA1
ANT (VHF/UHF)
on the Back of the TV
F-Type Antenna Adapter (not supplied)
Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.
Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
2
1
1.Insert the claws (at 4
points) at the top end.
2.Push the claws in (at 4
points) at the bottom
end.
Fitting 1.Insert the claws (at 4
points) at the top end.
2.Push the claws in (at 4
points) at the bottom
end.
2
1
Fitting