AT&T 9210 - Manual (Page 4)

3
T E L E P H O N E O P E R A T I O N
Handset Volume
Adjust volume of what you hear
through the handset.
Make or Answer a Call
Lift handset from base
— OR —
Press
P.
Flash/Call Waiting
Access special telephone
company subscriber services.
Change Channel
Switch to a clearer channel.
Redial
Press
P, then press R to call
the last number dialed (up to 24 digits).
End a Call
Place handset in base
— OR —
Press
O.
Exit programming.
Cancel a page.
Temporary Tone Dialing
Press to change from dial pulse
to touch tone dialing during a
call. This is useful if you have
dial pulse (rotary) service and
need to send touch tone signals
for access to telephone banking
or long-distance services.
1 Dial the number.
2 Press
*. Buttons pressed
after this send touch tone
signals.
3 After you hang up, the
phone automatically returns
to dial pulse (rotary) service.
Headset Jack
You can use this telephone
hands-free when you install a
2.5 mm headset (SKU 24099),
purchased separately.
Plug the headset into the jack
under the small rubber flap. Do
not force the connection, but
make sure the plug fits securely.
Handset Ringer Style/
Battery Save
Select from four different handset
ringer styles, or turn the ringer
off and extend battery life.
1 Make sure the handset is off.
2 Press
G, #.
3 Press
1, 2, 3 or 4 to select
your ringer style (you will
hear a sample), or press
5
to turn the ringer off.
4 Press
M.
When the ringer is off, select a
ringer style to turn it on again.