Panasonic KXTG7431 User Manual
Page 44
Useful Information
44
For assistance, please visit http://www.panasonic.com/help
Answering system
The caller list/incoming
phone numbers are not
edited automatically.
L
The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 20).
L
You need to call back the edited number to
activate Caller ID number auto edit.
I cannot dial the phone
number edited in the caller
list.
L
The phone number you dialed might have been
edited incorrectly (for example, the long distance
“1” or the area code is missing). Edit the phone
number with another pattern (page 28).
Time on the unit has
shifted.
L
Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
“Manual” (off) (page 22).
The 2nd caller’s
information is not
displayed during an
outside call.
L
In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
Problem
Cause/solution
The unit does not record
new messages.
L
The answering system is turned off. Turn it on
(page 30).
L
The message memory is full. Erase unnecessary
messages (page 31).
L
The recording time is set to “Greeting only”.
Change the setting (page 35).
L
If you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit’s
number of rings setting or contact your service
provider/telephone company (page 35).
I cannot operate the
answering system.
L
Someone is using the unit. Wait for the other user
to finish.
L
A caller is leaving a message. Wait for the caller to
finish.
L
The handset is too far from the base unit. Move
closer.
Problem
Cause/solution
TG743x(e).book Page 44 Monday, December 8, 2008 1:36 PM