Panasonic DMC-LZ30K - Manual (Page 116)

- 116 -
VQT4V99
Message displays
[Insert SD card again] [Try another card]
●
Access to card has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
●
Try with a different card.
[Memory card parameter error]
●
Card is not of SD standard.
●
When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are
supported.
[Read Error] / [Write Error] [Please check the card]
●
Data read has failed.
→ Check whether card has been inserted correctly. (→20)
●
Data write has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
●
Card may possibly be damaged.
●
Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●
If recording stops even when using a card of the recommended speed class (→22), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (→51).
●
Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
●
Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [Format] on the camera. (→51)
[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]
●
AV cable (supplied) is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV Aspect] (→50).