Panasonic MC-GG523 - Manual (Page 42)

- 42 -
Replacing Belt
+
Lift Agitator Up
Soulever l’agitateur
Inidad del agitador
+
Install New Belt
Poser la nouvelle
courroie
Instalaciòn de la
correa Motor Shaft
Eje del motor
Arbre
d'entraînement
du moteur
+
End Cap
Bouchon
Tapa del extremo
Groove
Ouverture
Ranura
➢ Remove lower plate.
➢ Remove agitator by carefully lifting
out.
➢ Remove worn or broken belt.
➢ Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct
belt routing.
➢ Reinstall agitator back into nozzle
housing grooves.
➢ After reinstalling the agitator, turn it
by hand to make sure that belt is
not twisted or pinched and that all
rotating parts turn freely.
➢ Reinstall lower plate.
Agitator Assembly
End Cap
End Cap
Belt
Pulley
Brush Unit